Why does the check engine light come on when I start my GL-10?

It's okay if your check engine light comes on when you first start your vehicle. It’s just your GL-10 firing up its circuits. The dash light shouldn't stay on. If it does, you might want to bring your vehicle in for service.

Why is my Subaru GL-10 making engine noise?

Unusual noises can signal a problem with your Subaru GL-10 engine. Tapping or knocking could mean you need an oil change. Whistling could mean a belt is misaligned or there's an intake leak. Squealing can be traced back to a loose fan belt, and grinding might be coming from the brakes, not the engine.

What could damage my Subaru GL-10 engine?

Certain driving habits can damage your engine and should be avoided. These habits include 'running on fumes,' flooring the gas pedal while the car is in Park, or pushing 'the pedal to the metal' before the engine has warmed up. Steer clear of these habits to help protect engine performance and efficiency.

Is it okay to put water in my Subaru GL-10 radiator?

While it’s not recommended, you can use water in your GL-10 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.

What can cause the engine in my GL-10 to suddenly stop?

Your GL-10 car engine could stop suddenly due to low fuel, electrical issues, overheating, a faulty ignition system, mechanical troubles, or sensor problems.

Where can I go for Subaru GL-10 repair?

Your local Firestone Complete Auto Care offers Subaru GL-10 engine repair. Schedule an appointment today at one of our thousands of locations nationwide!

Reliable Repairs for 1986 Subaru GL-10 Engines

Learn about

1986 Subaru GL-10 Trim Options

Select your Subaru GL-10 trim level to learn more about Subaru-recommended engine repair. Even Subaru GL-10 parts will get older and change.

H4/1.8L

Subaru GL-10 Repairs and Services

Nothing stays the same forever. Even your Subaru GL-10’s engine parts and components will change. When something breaks or fails, we’re ready to help. Click on a repair below to learn more about 1986 Subaru GL-10 repairs.

We Care for Subaru GL-10 Engines

The Subaru GL-10 is respected for its reliability. You may have even been thinking about that when you bought it. Even so, pieces and parts can break down over time. Sometimes plans go sideways. When they do, you might find yourself searching for 1986 Subaru GL-10 engine repair or replacement parts. That’s where Firestone Complete Auto Care comes in. We've serviced more than 500 million vehicles since 1926, and our technicians know Subaru GL-10 engines. Schedule a courtesy inspection at the first sign of engine trouble. After all, Firestone Complete Auto Care is one of the most popular picks for professional engine repairs thanks to its service and affordability.

My 1986 Subaru GL-10 Check Engine Light Is On

If your GL-10 check engine light is on, it’s time to get it looked at. A steady or flashing check engine light could signal a serious issue with your combustion, Causes may include a faulty oxygen sensor, bad spark plug, a problem with your catalytic converter, or an engine vacuum leak, to name a few potential sources. Bring your GL-10 to Firestone Complete Auto Care to get computerized diagnostics and we’ll figure out why that check engine light is giving you grief. engine pinging noises, oil leaks, or misfiring.

Subaru GL-10 Engine Repair

If your 1986 GL-10 engine needs repairs, our technicians will make sure you understand what’s going on before they start working on your engine. We don't start working until we have your approval. If a repair isn’t urgent right now, we’ll let you know. We'll also tell you if it's necessary for your safety. We want to provide you with the information you need to make an informed engine repair decision. By choosing Firestone Complete Auto Care for GL-10 engine repairs and you can feel good knowing that we only use Subaru-compliant replacement parts such as the timing chain or belt, oil gasket, fuses, or a different component.

1986 Subaru GL-10 Engine Q&A

Why does the check engine light come on when I start my GL-10? It's okay if your check engine light comes on when you first start your vehicle. It’s just your GL-10 firing up its circuits. The dash light shouldn't stay on. If it does, you might want to bring your vehicle in for service.
Why is my Subaru GL-10 making engine noise? Unusual noises can signal a problem with your Subaru GL-10 engine. Tapping or knocking could mean you need an oil change. Whistling could mean a belt is misaligned or there's an intake leak. Squealing can be traced back to a loose fan belt, and grinding might be coming from the brakes, not the engine.
What could damage my Subaru GL-10 engine? Certain driving habits can damage your engine and should be avoided. These habits include 'running on fumes,' flooring the gas pedal while the car is in Park, or pushing 'the pedal to the metal' before the engine has warmed up. Steer clear of these habits to help protect engine performance and efficiency.
Is it okay to put water in my Subaru GL-10 radiator? While it’s not recommended, you can use water in your GL-10 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.
What can cause the engine in my GL-10 to suddenly stop? Your GL-10 car engine could stop suddenly due to low fuel, electrical issues, overheating, a faulty ignition system, mechanical troubles, or sensor problems.
Where can I go for Subaru GL-10 repair? Your local Firestone Complete Auto Care offers Subaru GL-10 engine repair. Schedule an appointment today at one of our thousands of locations nationwide!