Why does the check engine light come on when I start my 200?

It’s usually normal for your check engine light to turn on upon ignition. This is a sign that your vehicle is testing its circuits. The light should turn off in a bit, but come see us if it doesn't.

Why does my Chrysler engine sound different?

Strange under-the-hood noises can point to problems within your Chrysler 200 engine. Knocking or tapping could be a symptom of low oil. Whistling sounds could mean you have an intake leak or misaligned belt. Squealing can be traced back to a loose fan belt, and grinding might be coming from the brakes, not the engine.

What could damage my Chrysler 200 engine?

Certain driving habits can damage your engine and should be avoided. These habits include 'running on fumes,' revving your engine while the vehicle is in Park, or pushing 'the pedal to the metal' before the engine has warmed up. Steer clear of these habits to help protect engine performance and efficiency.

Can I use water in my Chrysler 200 radiator?

While it’s not recommended, you can use water in your 200 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.

Why did my 200 engine suddenly stop?

Reasons your 200 car engine may suddenly stop include engine overheating, electrical troubles, mechanical issues, ignition system problems, faulty sensors, and low fuel.

Who fixes Chrysler 200 engines?

Your local Firestone Complete Auto Care has you covered with expert 200 engine repair. Schedule an appointment today and see us at one of our thousands of locations.

Engine Repairs for Your 2013 Chrysler 200

Learn about

2013 Chrysler 200 Trim Options

Select your Chrysler 200 trim level to learn more about Chrysler-recommended engine repair. Even Chrysler 200 parts will get older and change.

L4/2.4L

V6/3.6L

Repairs for Your 2013 Chrysler 200

Stuff wears out. Even your Chrysler 200's many parts and pieces. When something breaks, we're ready. Select a service or repair below to learn more about what we can do for your 2013 Chrysler 200.

We Know Chrysler 200 Engines

Chrysler 200 drivers trust that their 200 will take them near and far. That might be why you bought it in the first place. However, even your trustworthy engine is subject to wear and tear. Things can go wrong on the road. If they do, you’ll have to find a dependable 2013 Chrysler service center — quick! Luckily, you won’t have to look far, since Firestone Complete Auto Care has 1,700+ locations across the country. We've serviced more than 500 million vehicles since 1926, and our technicians know Chrysler 200 engines. If you think something’s wrong with your engine, schedule an appointment at your convenience. Firestone Complete Auto Care is a top choice for professional engine diagnosis, service, and repair at an affordable price.

My 2013 Chrysler 200 Check Engine Light Is On

As soon as your 200 check engine light turns on, it’s time to get an expert’s opinion. A check engine light that’s on or flashing could be a symptom of a serious problem in your vehicle's ignition, Causes may include a faulty oxygen sensor, worn spark plug, a clogged catalytic converter, or a leaking engine vacuum, to name a few potential sources. Bring your 200 in for an on-board diagnostic check and we'll determine exactly why your check engine light is on. Other signs it's time for Chrysler 200 engine service might include oil leaks, or a sinking feeling that something’s wrong.

2013 200 Engine Services

When your Chrysler 200 engine needs repairs, our technicians will make sure you understand what’s going on before they start working on your engine. We never do any work without your sign-off. If a repair isn’t urgent right now, we’ll let you know. But if immediate repairs are necessary for your safety, we’ll make sure that's clear, too. We seek to give you all the info you need to make a smart decision about our services. By choosing Firestone Complete Auto Care for 200 engine repairs and you can feel good knowing that we only use Chrysler-compliant replacement parts such as the timing chain or belt, engine oil seal, sensors, or other parts.

Engine Q&A 2013 Chrysler 200

Why does the check engine light come on when I start my 200? It’s usually normal for your check engine light to turn on upon ignition. This is a sign that your vehicle is testing its circuits. The light should turn off in a bit, but come see us if it doesn't.
Why does my Chrysler engine sound different? Strange under-the-hood noises can point to problems within your Chrysler 200 engine. Knocking or tapping could be a symptom of low oil. Whistling sounds could mean you have an intake leak or misaligned belt. Squealing can be traced back to a loose fan belt, and grinding might be coming from the brakes, not the engine.
What could damage my Chrysler 200 engine? Certain driving habits can damage your engine and should be avoided. These habits include 'running on fumes,' revving your engine while the vehicle is in Park, or pushing 'the pedal to the metal' before the engine has warmed up. Steer clear of these habits to help protect engine performance and efficiency.
Can I use water in my Chrysler 200 radiator? While it’s not recommended, you can use water in your 200 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.
Why did my 200 engine suddenly stop? Reasons your 200 car engine may suddenly stop include engine overheating, electrical troubles, mechanical issues, ignition system problems, faulty sensors, and low fuel.
Who fixes Chrysler 200 engines? Your local Firestone Complete Auto Care has you covered with expert 200 engine repair. Schedule an appointment today and see us at one of our thousands of locations.