Why does the check engine light in my 200 turn on when I start my car?

It’s usually normal for your check engine light to turn on upon ignition. This is just your 200 testing its circuits. The light should turn off in a bit, but come see us if it doesn't.

Are Chrysler 200 engine noises bad?

Strange under-the-hood noises can point to problems within your Chrysler 200 engine. Knocking or tapping could be a symptom of low oil. A high-pitched whistle could signal an intake leak or misaligned belt. Squealing may be caused by a loose fan belt, and grinding might be a sign of brake problems rather than engine issues.

What could damage my Chrysler 200 engine?

Some driving habits are not so great for your engine. These include driving on a near-empty gas tank, flooring the gas pedal while the car is in Park, or accelerating too quickly, too soon. Steer clear of these habits to help protect engine performance and efficiency.

Can I add water to my Chrysler 200 radiator?

While it’s not recommended, you can use water in your 200 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.

Why did my 200 engine suddenly stop?

Your 200 car engine could stop suddenly due to low fuel, electrical issues, overheating, a faulty ignition system, mechanical troubles, or sensor problems.

Who fixes Chrysler 200 engines?

Your local Firestone Complete Auto Care has you covered with expert 200 engine repair. Schedule an appointment today and see us at one of our thousands of locations.

Engine Repairs for Your 2015 Chrysler 200

Learn about

2015 Chrysler 200 Trim Options

Select your Chrysler 200 trim level to learn more about Chrysler-recommended engine repair. Use the following chart to find information.

L4/2.4L

V6/3.6L

2015 Chrysler 200 Repair

Stuff wears out. Even your Chrysler 200’s engine parts and components will change. When something breaks or fails, we’re ready to help. Select a repair or category to learn more about 2015 Chrysler 200 services.

We Know Chrysler 200 Engines

Chrysler 200 engines are known for their reliability. That might be why you bought it in the first place. However, even your trustworthy engine is subject to wear and tear. Things can go wrong on the road. If they do, you’ll have to find a dependable 2015 Chrysler service center — quick! That's when it's time to head to Firestone Complete Auto Care. Since 1926, we’ve taken care of 500 million+ cars, so you can rest assured knowing your Chrysler 200 engine will be in good hands. If you think something’s wrong with your engine, schedule an appointment at your convenience. Firestone Complete Auto Care is a top choice for professional engine diagnosis, service, and repair at an affordable price.

Illuminated Check Engine Light on 2015 Chrysler 200

An illuminated check engine light on your Chrysler 200 is one of the first signs it's time to 'brake' for engine service. A check engine light that’s flashing or steadily illuminated could point to problems with your car’s starter, Possible causes can include a failing oxygen sensor, worn spark plug, a clogged catalytic converter, or a leaking engine vacuum, to name a few potential sources. Bring your 200 in for an on-board diagnostic check and we’ll figure out why that check engine light is giving you grief. engine pinging noises, burning smells, or a sinking feeling that something’s wrong.

2015 200 Engine Services

When your Chrysler 200 engine needs repairs, our technicians will make sure you understand what’s going on before they start working on your engine. We never do any work without your sign-off. If a service can wait, we’ll make sure you know. But if immediate repairs are necessary for your safety, we’ll make sure that's clear, too. We want to provide you with the information you need to make an informed engine repair decision. Turn to Firestone Complete Auto Care for your 2015 200 engine repairs and you can drive easy knowing that we use Chrysler-approved parts and fluids — timing chain or belt, motor oil seal, fuses, or another part.

2015 Chrysler 200 Engine Q&A

Why does the check engine light in my 200 turn on when I start my car? It’s usually normal for your check engine light to turn on upon ignition. This is just your 200 testing its circuits. The light should turn off in a bit, but come see us if it doesn't.
Are Chrysler 200 engine noises bad? Strange under-the-hood noises can point to problems within your Chrysler 200 engine. Knocking or tapping could be a symptom of low oil. A high-pitched whistle could signal an intake leak or misaligned belt. Squealing may be caused by a loose fan belt, and grinding might be a sign of brake problems rather than engine issues.
What could damage my Chrysler 200 engine? Some driving habits are not so great for your engine. These include driving on a near-empty gas tank, flooring the gas pedal while the car is in Park, or accelerating too quickly, too soon. Steer clear of these habits to help protect engine performance and efficiency.
Can I add water to my Chrysler 200 radiator? While it’s not recommended, you can use water in your 200 radiator in emergencies. Normally, you should only use a 50/50 mix of coolant and water or a pre-mixed coolant. However, if you are completely out of coolant and must continue driving, it’s better to have water in your coolant reservoir than nothing.
Why did my 200 engine suddenly stop? Your 200 car engine could stop suddenly due to low fuel, electrical issues, overheating, a faulty ignition system, mechanical troubles, or sensor problems.
Who fixes Chrysler 200 engines? Your local Firestone Complete Auto Care has you covered with expert 200 engine repair. Schedule an appointment today and see us at one of our thousands of locations.